Top 15 how to do knockdown texture with a roller

Below is the best information and knowledge about how to do knockdown texture with a roller compiled and compiled by the infindall.com team, along with other related topics such as:: how to texture a wall with a roller, how to do knockdown texture without sprayer, how to orange peel texture walls with a roller, types of roll on texture, light knockdown texture, knockdown texture sponge, best roller for orange peel texture, drywall texture roller.

how to do knockdown texture with a roller

Image for keyword: how to do knockdown texture with a roller

The most popular articles about how to do knockdown texture with a roller

All You Need to Know About Knockdown Texture – Bob Vila

  • Author: www.bobvila.com

  • Evaluate 4 ⭐ (34499 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about All You Need to Know About Knockdown Texture – Bob Vila Because drywall is initially applied by roller to fully cover the surface, and an additional step of stomping is required before knockdown, the …

  • Match the search results: Plug the air compressor into a grounded wall outlet, open the air valve, and turn the compressor on, setting the pressure to 30 to 40 psi. Spray mud onto a sheet of scrap drywall from at least 18 inches away, using an even, continuous motion. As you test, settle on a spraying speed that provides the…

  • Quote from the source:

How to Put Knockdown on Ceiling With Paint Roller – Home …

  • Author: homeguides.sfgate.com

  • Evaluate 3 ⭐ (20079 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Put Knockdown on Ceiling With Paint Roller – Home … Pour some of the textured paint into a paint pan. Insert a fine-nap roller cover onto a roller handle. Insert a paint pole into the handle. Dip the roller into …

  • Match the search results: Start in a corner and begin rolling the texture onto the ceiling. Be sure to roll over the cut-in line and work in a manageable area about 3 feet by 3 feet to keep a wet edge for easier blending. Fill the section with textured paint and move to the next adjacent section. Roll over the edge of the pr…

  • Quote from the source:

Drywall Texturing Made Easy | DIY paint roller and knockdown …

  • Author: www.icanfixupmyhome.com

  • Evaluate 4 ⭐ (26033 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Drywall Texturing Made Easy | DIY paint roller and knockdown … For the knockdown texturing method, you still want to raise peaks in the mud on your drywall. The difference here is that rather than rolling the mud, the …

  • Match the search results:
    The purpose of this tutorial is to teach the homeowner just two of the many easy ways to texture
    sheetrock. You can use these to apply texture to a sheetrock wall or ceiling without
    the hassle of a hopper texture sprayer.

  • Quote from the source:

How to Roll on Knockdown Texture – HomeSteady

  • Author: homesteady.com

  • Evaluate 3 ⭐ (19225 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Roll on Knockdown Texture – HomeSteady Pour the mixture into a paint tray. Push a plastic loop roller onto a roller handle, and dip it into the tray, applying the mixture to all sides …

  • Match the search results: After drywall has been installed and sealed with tape and compound, a common choice is to apply various types of texture that not only enhance the room’s aesthetics, but also cover any mistakes made in the drywall installation process.

  • Quote from the source:

How do you use a roller knockdown texture? – FindAnyAnswer …

  • Author: findanyanswer.com

  • Evaluate 3 ⭐ (8581 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How do you use a roller knockdown texture? – FindAnyAnswer … Dip the paint roller into the texture, roll it across the screen and begin applying it to the ceiling about 2 feet from the wall. Roll the paint …

  • Match the search results: The texture stimulates two different senses: sight and touch. There are four types of texture in art: actual, simulated, abstract, and invented texture.

  • Quote from the source:

How to Apply Knock Down Texture – The Family Handyman

  • Author: www.familyhandyman.com

  • Evaluate 4 ⭐ (24870 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Apply Knock Down Texture – The Family Handyman A knockdown texture on walls or ceilings is a fast, easy way to hide flaws or repairs. For a beginner, it’s more forgiving than other textures.

  • Match the search results: The beauty of knockdown drywall texture is that it not only hides imperfections but also creates a more subtle look than heavier textures. A typical ceiling takes less than an hour to texture and costs less than $20 in materials. Best of all, it’s almost impossible to get a how to texture dryw…

  • Quote from the source:

How to Apply Knockdown Texture to Drywall Like a Total Pro

  • Author: rcacontractors.com

  • Evaluate 4 ⭐ (30950 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Apply Knockdown Texture to Drywall Like a Total Pro Flatten with a standard knockdown knife, leaving a finger-like texture on 60 percent or more of the surface. Because the stomp method requires a paint roller to …

  • Match the search results: Of all the knockdown textures, splatter is the most popular. With its custom, splotchy pattern, splatter texture has the classic look of Spanish lace and is the most popular (and consequently most common) of the knockdown textures.

  • Quote from the source:

Knockdown texture and roller nap – Houzz

  • Author: www.houzz.com

  • Evaluate 4 ⭐ (34053 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Knockdown texture and roller nap – Houzz Hopefully everything will even out when I do my second coat. Should I be using a longer nap? My understanding is that the longer the nap, the more the paint …

  • Match the search results: All my walls and ceilings have knockdown texture. I first primed everything (there was some wall repair and retexturing) and then applied my first coat of paint. The paint store recommended 1/2″ nap roller cover. Everything seemed to be rolling on just dandy. I was surprised how relatively drip- and…

  • Quote from the source:

Question: How To Do Knockdown Ceiling Texture

  • Author: www.seniorcare2share.com

  • Evaluate 3 ⭐ (1259 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Question: How To Do Knockdown Ceiling Texture You can apply many types of wall texture with a paint roller. To apply a knockdown, though, you need stiff …

  • Match the search results: You can apply many types of wall texture with a paint roller. To apply a knockdown, though, you need stiff texture and a stiff roller cover, because you want the material to form clumps on the wall. Most paint outlets sell texture roller covers, which are primarily intended for applying texture pai…

  • Quote from the source:

How To Texture Drywall With A Roller & Mud: 10 Steps That …

  • Author: maddiary.com

  • Evaluate 4 ⭐ (21031 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How To Texture Drywall With A Roller & Mud: 10 Steps That … Texturing is the best way to make your drywall more beautiful and … orange peel texture, Knockdown texture, tree type texture and so many.

  • Match the search results: Comb texture, Popcorn texture, orange peel texture, Knockdown texture, tree type texture and so many. With the help of textures, you can hide minor as well as major imperfections of drywall.  

  • Quote from the source:

Texturing walls with a roller – Plum Prairie Ranch

  • Author: www.plumprairieranch.com

  • Evaluate 3 ⭐ (6187 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Texturing walls with a roller – Plum Prairie Ranch Be prepared to use a lot of drywall compound. I went through about two gallons in my 100-square-foot master bath. I tried to do the knockdown …

  • Match the search results: Most of my walls are painted and have an orange peel texture, which is achieved with a sprayer and involves taping off everything else in the area. Because we were doing our bathroom in little chunks of time, mostly on the weekends, I wanted to texture and paint the area behind the new vanities befo…

  • Quote from the source:

Customer Reviews for 9 in. x 3/8 in. Loop Texture Roller Cover

  • Author: www.homedepot.com

  • Evaluate 4 ⭐ (28728 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Customer Reviews for 9 in. x 3/8 in. Loop Texture Roller Cover Thicker mud = heavier texture/harder to apply to ceiling/hides more. … This roller worked great to match an existing heavy knockdown texture on a remodel …

  • Match the search results:
    Reference #18.1433431b.1648791966.956f96c9

  • Quote from the source:

Applying Drywall Compound With a Textured Roller

  • Author: www.probuilder.com

  • Evaluate 4 ⭐ (25959 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Applying Drywall Compound With a Textured Roller In the region where I work in upstate New York, we do very little texturing. But for those regions where textured finishing is popular, this …

  • Match the search results: I discovered the concept on one of my drywall jobs years ago when we were matching a texture on a blended ceiling. The process was simple; we thinned down some compound and rolled it over the drywall and then created the texture with a stomp brush. In the region where I work in upstate New York, we …

  • Quote from the source:

Roll-on texture Wall & Ceiling Textures at Lowes.com

  • Author: www.lowes.com

  • Evaluate 3 ⭐ (1078 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Roll-on texture Wall & Ceiling Textures at Lowes.com You can use a roller to apply the texture to your walls, then make patterns with a sponge, trowel, grout spreader or even crumpled paper. Use a hopper gun to …

  • Match the search results:
    Reference #18.1c33431b.1648791974.9dbae970

  • Quote from the source:

Choosing the Right Paint Roller Nap for Interior Walls with …

  • Author: www.ciarlantipainting.com

  • Evaluate 3 ⭐ (15577 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Choosing the Right Paint Roller Nap for Interior Walls with … Each roller is also designed to apply paint to different types of surface better than … Roller Nap for Knockdown or Other Medium Textures.

  • Match the search results: We’re sorry, but we could not fulfill your request for
    /choosing-the-right-paint-roller-nap-for-interior-walls-with-smooth-knockdown-or-other-texture-in-encinitas-ca/ on this server.

  • Quote from the source:

Multi-read content how to do knockdown texture with a roller

All You Need to Know About Knockdown Texture

Photo: istockphoto.com

The knockdown drywall finish, an early 1990s successor to the popcorn and orange peel pattern, remains a hit with homeowners for its drama and practicality. The look is achieved by spraying, plastering, or rolling drywall joint compound onto a wall or ceiling to achieve icicle-like peaks, then flattening the peaks with a knife. The result is voluminous, natural, adding the visual impact of dimensionality while easily masking any surface imperfections. As a bonus, the processing helps cut the sound.

Another part of the call? Handymen equippedBasic Drywall Skillsand some affordable tools and materials that can create the look easily! Read on for an overview of texture removal techniques, as well as a step-by-step guide on how to remove this most common type of finish, to achieve a disdainful effect in your home.

All You Need to Know About Knockdown Texture

Photo: flickr.com via bradleypjohnson

Three types of textures

There are three main types of textures – splatters, stompers, and mudguards – each with a distinct look and requiring unique tools and techniques.

  • Splash:
  • The most popular of accents, the splash features the classic look of Spanish lace coulis – an intricate pattern inspired by lace veils. This is achieved by using a drywall hopper gun (available at home centers; around $13 for a half-day rental) which is first accomplished by spraying a mixture of mud or powder wet drywall pre-mixed with water. The formed tops are then flattened with an 18-inch or wider extension knife ($15-$20) to achieve a raised, low-profile texture that covers 40% of the surface (the remaining 60% when flat). the
  • the app can be a bit messy
  • , especially when sprayed overhead (due to downward splashing). And because a drywall gun is required, this technique requires more initial setup time than stomping and flying mud, but once you’re ready to go, application is quick, even, and less tiring. You can splash a small area in as little as an hour or complete a larger area in about a day.
  • Trample:
  • The most textured look of the three, stomping higher than mud splash or flight. It is made by diluting a pre-mixed or pre-mixed drywall grout with water, then using a roller to coat walls or ceilings. Next, a crow’s-foot brush with stiff bristles ($8-$20) is stomped into the mud and finally the mud is smoothed out with a standard impact knife, leaving a finger-like texture on top . . Since drywall is initially applied with a roller to completely cover the surface and requires an extra step of stomping before knocking it down, the whole process can take about twice as long as spattering.
  • Mud:
  • Also known as fly hopping, this technique offers a flatter, more refined look than splashing or stomping. This can be achieved by trotting the drywall 18 inches or wider ($25 to $30), then brushing the cleaned trowel back over the plastered area. The curved flight shaft literally makes mud fly over a wall or ceiling, leaving a sparse texture of quarter-sized round particles over 50% of the surface. Hand throwing requires patience, which makes this technique more time consuming than splashing.

Find a local expert

+

All You Need to Know About Knockdown Texture

Photo: istockphoto.com

How to Apply Knockdown Texture

Use this process to create a splashy texture, a popular choice among most homeowners. Although our guide includes information on how to mix drywall mix powder, you can skip step 4 and use pre-mixed wet drywall grout.

TOOLS AND MATERIALS Available on Amazon
– Tarp
– Ribbon
– Polishing paste
– Fine sandpaper (150 grit or more)
-Drywall Hopper Gun Kit
– Gas line
-Compressor(minimum capacity 30 to 40 psi)
-1.5 gallon mixed powder(not fast drying)
-6 inch drywall knife
– 2 gallon bucket
– Dynamic drill with agitator
– Debris of drywall (for test)
-18 inch removable knife
– To give up

STEP 1: Prepare the space.

Gather the furniture in the room and spread the canvas on the floor. Remove light fixtures and wall fixings and tape on electrical covers, baseboards and wall or ceiling braces to protect against excessive water penetration.

STEP 2: Smooth the surface.

Removable Texture can be applied to bare or painted drywall as long as the surface is stain free. For surface preparation, do not wear gloves or goggles andapply a compound coatingto dividers or cracks. Dry the compound according to the directions on the package, then sand with fine sandpaper.

STEP 3: Assemble the gun.

Attach the hopper (tray) to the top of the drywall hopper gun, then attach the gun assembly and air duct to the air compressor. Mount the nozzle on the gun – a nozzle measuring 8 to 12 millimeters is ideal for takedown structures.

STEP 4: Mix drywall joint mix.

Choose an unincorporated drywall powder (avoid fast-drying powders, which dry too quickly compared to the take-down technique). Fill a two-gallon bucket with two inches of cold or room-temperature water, then add 1.5 gallons of drywall mix powder and mix using an electric drill with an agitator (see example on Amazon) until the porridge does not clump together.

STEP 5: Test the mud.

Pick up a small amount of mud with a drywall knife, then tilt the knife at a 30 degree angle. If the porridge slides easily, it has reached a suitable fine consistency; if not, add water, mix and try again. Leave the mud for 15 minutes to absorb all the water. Then stir gently with the wick.

When your porridge has the consistency of pancake batter, pour it into the hopper.

All You Need to Know About Knockdown Texture

Photo: istockphoto.com

STEP 6: Choose your optimal spray speed.

Plug the air compressor into a grounded wall outlet, open the air valve and turn on the compressor, adjusting the pressure between 30 and 40 psi. Spray the grout onto the sheet of drywall from at least 18 inches away, using a steady, continuous motion. During the test, choose a spray speed to achieve the desired texture weight. The slower you spray, the thicker and more pronounced the texture; A quick spray will give a finer, lighter texture.

STEP 7: Mash the surface.

Once you’ve perfected your technique, pull the trigger on the drywall funnel to blast a projected wall or ceiling into 3-foot segments about 18 inches apart.

Tip: Activate the trigger lock function of the gun to spray continuously without having to manually maintain pressure on the trigger.

STEP 8: Perform the rollover motion.

Allow each piece to dry just long enough to lose its wet sheen – about 10-15 minutes. Attach the cutlery to an extender, then slide the edge straight across the surface. Your goal is simply to flatten the vertices inwall texture, don’t smooth it too much to erase it. Wipe the knife edge of the drywall with a damp cloth.

STEP 9: Take turns splashing and spilling.

Repeat this process, alternating between pouring and knocking down the structure, in segments approximately 3m long until you have covered the intended area. When finished, close the compressor air valve, then turn off and unplug the unit.

STEP 10: Let dry and finish.

Allow the drywall grout to dry completely according to the manufacturer’s instructions, anywhere from a few hours to overnight, before removing the masking tape and tarp and replacing the wall fixtures and lights. If you plan to paint poured textures, wait a few days to a week before priming and painting.

Keep Knockdown looking good!

  • Dust the surface weekly with an electrostatic vacuum or a vacuum cleaner with a soft brush attached. Never use a scrub brush or abrasive brush head as this may damage the texture.
  • To remove dirt and smudges, wet the paint roller with a solution of one teaspoon of liquid dish soap and four cups of warm water. Gently go over dirty areas, then use a clean, damp roller to remove soap residue and finish with a dry roller or soft sponge.
  • Joint compound can build up on smoke and soot stains over time, so avoid smoking and limit how often you burn fireplaces near structural surfaces.

Find a local expert

+

Popular questions about how to do knockdown texture with a roller

Can you apply knockdown texture with a roller?

Knockdown is one of the more basic texture styles, though; it’s easy to do and doesn’t require much texture material. To accomplish a knockdown, you apply texture — often the same joint compound you used for taping — by scraping it on with a drywall knife or rolling it with a texture roller.

How do you do knockdown texture without sprayer?

How do you create knockdown texture?

How do you paint knockdown texture?

5 Tricks for Painting Textured Walls
  1. Fill Holes and Scratches.
  2. Vacuum and Wipe Down Walls.
  3. Remove Outlet and Switch Covers.
  4. Tape Baseboards and Transition Areas.
  5. Use the Right Painting Tools.
  6. Apply a second coat.
  7. Clean Up.
  8. Admire Your Newly Painted Textured Walls!

Can you roll texture drywall?

Wall texture can cover up imperfect drywall or mudding work, and it dries rapidly enough that you can begin painting just hours later. Best of all, wall texturing—also known as wall stippling—can be accomplished with a roller and materials that are easy and inexpensive to obtain.

How do you apply texture to a roller ceiling?

What kind of roller should I use to paint textured walls?

Rough surfaces require a higher nap (3/4” to 1-1/2”) so the long fibers can reach into the valleys of the texture. Higher nap heights are great for textured plaster or stucco, siding, decks, concrete block, brick, and corrugated metal.

Can you roll on drywall mud?

How do you texture a ceiling with a roller?

How do you mix drywall mud for roll on texture?

Pour a small amount of clear water into the mud and stir with a stomper, which resembles a potato masher on a pole, or an electric drill and a paint mixing attachment. Mix the mud until it has a uniform consistency, then add more water. Continue until the mud has the consistency you need for texturing.

How long do you wait before you knock down texture?

Knock down the splatter texture

As soon as the wet shine disappears from the first area you sprayed—usually after 10 to 15 minutes—get moving. Drag the knockdown knife in straight, overlapping courses.

How do you knock down a ceiling?

How long should knockdown texture dry before painting?

24 hours
Allow the compound to dry completely – at least 24 hours. Opening windows or using a box fan will assist the drying process. Once the mud is dry, simply prime and paint the textured surface the way you would new drywall.

How much joint compound do I need for knockdown texture?

When applying thick knockdown finishes, expect to use about 1 gallon of joint compound per 50 square feet of ceiling space. Thick finishes are applied with trowels or are rolled on with a paint roller and then knocked down with a drywall trowel. Only about 75 percent of the surface needs to be covered.

Is knockdown texture in style?

Knockdown is a more rustic flattened texture commonly used to hide those stubborn surface imperfections. This type of texture is known for its casual elegance and is most seen in Southwest or Mediterranean style homes.

Video tutorials about how to do knockdown texture with a roller

keywords: #Howto, #rollknockdown, #rollwalltexture, #mudwalltexture, #sheetrockmudtexture, #troweltexture, #makewalltexture, #textureawall, #paintrollerwalltexture, #sheetrocktexture, #DIY, #HowToVideoChannel, #HowToVideoChannel, #DIYTricks, #DIYHacks

Creating a nice wall texture can be a challenge. Using cans of spray texture can also be a mess. However, there is a method that doesn’t involve spraying. You can roll on your wall texture and then knock it down for a beautiful finish. Check out this video to learn how!

Paint Roller Kit

-https://ebay.us/G9nY9I

Paint Roller Refills

-https://ebay.us/z6Bf16

Paint Roller Trays

-https://ebay.us/5CLsA9

Sheetrock Mud

-https://ebay.us/r6EWJ7

Homax Knockdown Knife

-https://ebay.us/3x7F1j

Put Down A Plastic Drop Cloth

-https://ebay.us/oC5wmH

You May Want A Cloth Dropcloth

-https://ebay.us/7wwYrs

_____________________ .

How To Video Channel is a project created by Spencer Coffman to help you learn how to get things done in a faster, more efficient, manner.

-https://spencercoffman.com

Your support is appreciated.

-https://spencercoffman.com/Donate-Venmo

-https://spencercoffman.com/Donate-PayPal

CashApp: $spencercoffman8

.

_____________________

keywords: #howtodrywallfinish, #howtotexturedrywall, #rollingondrywalltexture, #rollondrywalltexture, #paintrollerdrywallfinish, #rollonplaster, #rollonmud, #rollingondrywallmud, #howtoknockdowntexture, #howtoknockdowndrywall, #knockingdowndrywall, #knockdowndrywallfinish, #jointcompoundfinish, #dywallmudfinish, #textureroller, #howtosheetrock, #sheetrock

Easily Roll On Drywall Texture Finish with “Knockdown”. Great Easy Alternative to Spraying.

Tools/Supplies

12″ Drywall Knife for “Knockdown”-

-https://amzn.to/2KMCbHm

Putty Knife Set-

-https://amzn.to/2FZPrLo

Drywall Edge Planer-

-https://amzn.to/2KPvNiC

Utility Knife-

-http://amzn.to/2rIeUQP

Nap Rollers for Texturing 3/4″-

-https://amzn.to/2Otjn2a

Paint Roller Kit-

-https://amzn.to/2OvLYUp

Paint Extension Pole-

-https://amzn.to/2nxNSIV

Respirator Masks N95-

-http://amzn.to/2xX32x3

Safety Glasses-

-http://amzn.to/2ez41Jw

Leather Work Gloves-

-http://amzn.to/2x5BZk3

If you Enjoy the Channel Consider Helping Support it

Paypal Donation-

-https://www.paypal.me/JonnyDIY

Thank you for watching, Consider Subscribing \u0026 Click BELL Icon To Enable Notifications for NEW Upcoming Videos, Give a Thumbs up, Comment \u0026 Share, I’d appreciate it tremendously! 🙂

Remember to Keep on, Doin it Yourself!

keywords: #seejanedrill, #seejanedrill, #how-to, #howto, #diy, #do-it-yourself, #homeimprovements, #walltexture, #texture, #textures, #knockdown, #knockdowntexture, #wall, #ceiling, #ceilingtexture, #walltextures, #ceilingtextures, #jointcompound, #mud, #roll-on, #roller, #rollersleeve, #stipplebrush, #midgettrowel, #trowel, #differenttextures, #texturing, #texturingwalls, #texturingceilings, #easy, #simple, #technique, #finishingtrades

Leah demonstrates how to create a knockdown texture for your walls or ceiling in 3 simple steps.

Support See Jane Drill by shopping on Amazon through our link:

-http://www.amazon.com/?tag=sejadr-20

Channel

http:/www.youtube.com/seejanedrill

Website

-http://www.seejanedrill.com

Facebook

-http://www.facebook.com/seejanedrill

Twitter

-http://www.twitter.com/seejanedrill

-https://youtu.be/WUYcYEV14Vo

Disclaimer:

Due to factors beyond the control of See Jane Drill, we cannot guarantee against improper use or unauthorized modifications of this information. See Jane Drill assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. See Jane Drill recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of See Jane Drill, no information contained on this youtube channel, Facebook page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not See Jane Drill.

keywords:

https://www.pinterest.com/pin/apply-knockdown-texture–323766660695188716/

See more articles in category: faqs